Printer Repair Austin, TX

Problem: Xerox AltaLink C8070 in Austin reported repeated paper jams occurring on every print attempt.

Solution: Technician cleared a paper jam found within the paper path behind the left-side door, then inspected the area for damage. Normal print operation restored upon completion.

Problem: Xerox WorkCentre 7845 reported jamming consistently during copy and scan jobs.

Solution: Inspection revealed a severely worn DADF roller kit causing paper slip and repeated jams. The technician replaced the roller kit and cleaned the unit; copy and scan functions resumed normal operation.

Problem: Xerox VersaLink C405 in Pflugerville producing smeared output with toner transferring off printed pages.

Solution: Inspection revealed the fuser unit was not reaching proper operating temperature. The defective fuser was replaced and the unit cleaned, restoring normal print quality.

Problem: Xerox WorkCentre 7845 copier producing yellow streaks and spots on printed pages.

Solution: Inspection revealed a worn yellow drum unit. Technician cleaned the affected components and installed a replacement drum unit, restoring print output to factory specifications.

Problem: The flatbed/ADF scanner on a Brother MFC-9330CDW was non-functional, preventing document scanning from the top feeder.

Solution: Diagnosed the ADF scanner failure as a driver conflict rather than a hardware fault. Provided the customer with written instructions to delete the driver, reboot, and reinstall to restore full scanner functionality.

Problem: Customer in Austin, TX required a new Lexmark C2535dw color laser printer.

Solution: A new Lexmark C2535dw color laser printer was procured and shipped directly to the customer's location.

Problem: Xerox WorkCentre 7845 reported with persistent paper jams occurring throughout normal operation.

Solution: Inspection of the paper path revealed sheets were not reaching the fuser, instead catching at the side door. The side door paper path was repaired, the unit was cleaned and reset, and the copier returned to ready status with normal print output confirmed.

Problem: A Leander, TX office required a new Lexmark MS821n laser printer procured and deployed to a corporate department.

Solution: Technician sourced, delivered, and set up a new Lexmark MS821n monochrome laser printer at the customer's corporate office location.

Problem: Xerox AltaLink C8155 in Austin, TX reported intermittent paper jams originating from Tray 2.

Solution: Technician diagnosed a faulty sensor within the Tray 2 paper feeder assembly. Replacing the defective sensor eliminated the intermittent jamming.

Problem: Xerox WorkCentre 7225 reported emitting a screeching noise traced to the automatic document feeder (ADF) during normal operation.

Solution: Technician cleaned ADF rollers and glass, confirmed the noise originated from the ADF, then returned to replace the ADF Maintenance Kit (parts 604K58410 and 604K77810). Unit tested and verified noise-free after repair.

Problem: Customer requested procurement and delivery of a new Lexmark MS431dn laser printer with an additional paper tray.

Solution: Sourced and received the Lexmark MS431dn along with the optional paper tray. Both units were tested and confirmed fully operational before delivery to the customer's location.

Problem: A Lexmark MS810 laser printer in the accounting office required replacement with a newer model and two optional paper tray units.

Solution: A Lexmark MS821DN was delivered and configured with two optional input trays. Network settings were carried over from the MS810, the unit was installed into production, and the retired MS810 was removed and disposed of.