Printer Repair Hollywood, CA

Problem: Xerox WorkCentre 6605DN presented multiple issues: torn paper lodged at the rear of the unit, warped media in the tray, and worn feed rollers requiring replacement.

Solution: Disassembled rear of the printer to extract multiple torn paper fragments. Removed and discarded warped stock from Tray 2. Cleaned and replaced feed rollers, roller kit (604K77980), transfer kit, and imaging kit (675K47673, 675K47672, 675K47671, 675K47670, 604K55370, 604K77672) from customer stock.

Problem: Lexmark XS734de multifunction laser printer producing blue vertical streaks down printed pages.

Solution: Diagnosed a faulty cyan photoconductor unit as the source of the streaking. Replaced the defective cyan photoconductor with an in-stock unit; toner was ruled out first. Test prints confirmed the streaking was eliminated.

Problem: Lexmark MS810 laser printer in Culver City jamming when feeding letterhead stock through the multipurpose tray; standard invoice paper fed without issue.

Solution: Replaced the multipurpose tray feed/pick roller. Post-replacement diagnostics cleared, but letterhead continued to jam. Inspection revealed curl along both short edges across the entire paper supply — multiple boxes affected, consistent with moisture absorption from high-humidity storage conditions.

Problem: Lexmark MS810 laser printer in Santa Monica was multi-feeding — pulling two pages simultaneously through the paper path across all three trays.

Solution: Replaced pickup roller assemblies (40X7593) and separation roller assemblies (40X7713) in Trays 1, 2, and 3. Cleaned the paper path and tested the printer to confirm single-sheet feed operation.

Problem: Lexmark MS610 laser printer in Glendale, CA displayed a maintenance low message, and the printed image exhibited a light void.

Solution: Replaced the fuser, Tray 1 and Tray 2 pickup roller assemblies, and Tray 1 separation roller assembly. A light void in output prompted replacement of the image unit as well. Cleaned and tested the printer to confirm proper operation.

Problem: Lexmark MS610dn laser printer at a Beverly Hills location was due for preventive maintenance as part of a multi-unit service visit.

Solution: Technician performed a full preventive maintenance service on the Lexmark MS610dn — cleaning internal components throughout and completing a functional test to confirm proper operation.

Problem: A Lexmark T640 laser printer, one of multiple recently acquired units, required inspection to verify operational condition before being placed into service.

Solution: Technician cleaned the unit of accumulated dust and replaced the feed rollers (parts 40X1765 and 99A0070) to restore reliable paper handling. Printer was tested and confirmed operational.

Problem: Lexmark CX510de producing black smudging along the left side of every page and displaying a 'Replace Black Imaging Kit' alert.

Solution: Inspection revealed a depleted Black Imaging Kit (70C0Z10), heavily worn ADF pickup roller assembly (40X8736), worn ADF separation roller (40X9108), and worn pick tires in trays 1 and 2 (40X5168). A repair quote was issued; the customer did not authorize the work and the call was closed.

Problem: Lexmark MS810 laser printer in Glendale, CA reported a persistent service error 121.22, indicating a fuser maintenance fault at 236,492 pages.

Solution: Performed a general PM; error 121.22 persisted, confirming fuser failure. Ordered and installed Fuser Maintenance Kit (PN 40X8420). Error cleared and printer returned to full operation.

Problem: Brother MFC-L8900CDW producing pages with a wrinkled crease running down the length of the output.

Solution: Inspection confirmed a faulty fuser unit as the source of the wrinkling. Customer declined repair after receiving the quote. Call closed.

Problem: Lexmark MX510de reported recurring paper jam errors with no visible jam location. The pickup roller was failing to grip paper, and wrinkled sheets were jamming at the fuser.

Solution: Inspection revealed a toner dump had coated the pickup roller, causing it to slip on paper. Crystallized toner on the fuser paper guide was wrinkling sheets mid-feed. Technician cleaned the roller, fuser guide, and surrounding paper path components; printer returned to normal operation.

Problem: Lexmark XM7155 multifunction laser printer in Pasadena, CA was due for a scheduled preventive maintenance service (PM 5 of 6).

Solution: Performed scheduled PM on the Lexmark XM7155. Cleaned all feed rollers, separation pads, scanner glass, and interior. Verified print and copy functions before closing the call.