Printer Repair Aurora, CO

Problem: OKI C331 color laser printer was due for a PM2-level preventive maintenance service.

Solution: Technician performed PM2 preventive maintenance on the OKI C331, cleaned internal components, and tested the printer to confirm proper operation.

Problem: A Littleton, CO business required a new Lexmark B2650dw monochrome laser printer to be sourced and delivered to their office location.

Solution: Technician procured and delivered a new Lexmark B2650dw (S/N 460001531CMFZ) to the customer's location, with installation pending on the customer's end.

Problem: A Dell 5130cdn laser printer in Denver was producing degraded print quality traced to a failing fuser unit.

Solution: The technician replaced the fuser assembly on the Dell 5130cdn and tested the printer to confirm restored output quality.

Problem: Lexmark MS810de in Littleton experiencing significant delays when printing end-of-day reports; internal test prints completed normally.

Solution: Technician reproduced the delay and updated the device firmware. A follow-up visit confirmed the issue had resolved — end-of-day report printing returned to normal performance.

Problem: Lexmark MS610dn laser printer presented with heavy internal contamination, degraded pick tires in Tray 1, and unreliable paper handling.

Solution: Technician thoroughly cleaned the interior, replaced the Tray 1 pick tires, and tested the printer to confirm reliable paper feed and print quality.

Problem: Lexmark C792 color laser printer reported for fuser replacement.

Solution: Replaced the fuser unit along with magenta and black toner cartridges. Verified operation through post-service testing.

Problem: Lexmark MS810 in Castle Rock not printing from Tray 1, or printing only one page at a time. Unit also displayed a 'Replace Maintenance Kit' alert.

Solution: Inspected Trays 1, 2, and 3 — pickup roller assemblies (40X7593) and separation roller assemblies (40X7713) were worn. Replaced all six roller assemblies along with the fuser (40X7743). Cleaned and tested printer to confirm reliable multi-page feed from all trays.

Problem: Lexmark MS810 laser printer was due for a maintenance kit replacement, with worn feed rollers and accumulated dust contributing to feed reliability concerns.

Solution: Installed a full maintenance kit on the Lexmark MS810, reset the maintenance count, cleaned internal dust buildup, and cleaned the roller and separation pad. Tested paper feed from both trays to confirm reliable operation.

Problem: A Lexmark MS610 laser printer in Brighton reported recurring paper jams across both tray 1 and tray 2 feed paths.

Solution: Technician replaced tray 1 and tray 2 pick tires (41X0918 ×4) and separation roller assemblies (40X8444 ×2), then cleaned and tested the printer to confirm reliable paper feed.

Problem: An Englewood, CO customer required three Lexmark C2535dw color laser printers for deployment across multiple dealership locations, each unit designated for printing DMV tags.

Solution: Sourced and fulfilled an order for three Lexmark C2535dw color laser printers. Units were shipped to a central location for internal distribution to each of the three dealership sites.

Problem: OKI B4400 laser printer would not print, leaving the customer without any printing capability while their primary printer was also awaiting replacement.

Solution: Technician connected the B4400 to an available workstation to diagnose the issue and confirmed the toner cartridge was depleted. A replacement toner cartridge was ordered and shipped to the customer. Follow-up confirmed the new toner resolved the problem. A recurring paper jam was also noted for fut

Problem: Lexmark CS725de laser printer in Englewood reported a fuser issue requiring urgent attention.

Solution: Technician installed a replacement fuser unit, then cleaned and tested the printer to confirm proper operation.